A complete stand alone unit that monitors both the tanks (Sump or underground tank and the receiving/ overhead tank). Fully automatic, maintenance free magnetic level sensor ensures permanent trouble free automation.

Product Code : Flic V2

A complete stand alone unit that switches ON a pump at Low Level and tank and switches off when the tank is full. Fully automatic, maintenance free magnetic level sensor ensures permanent trouble free automation. Models suitable for single submersible pumps, and three phase pumps. Can also be configured to provide alarm independently or in addition to control to warn in case of control failure.

Product Cade : FLIC V1

If water supply is at 4 a.m. or any earthly or unearhly hour, the system will start the pump, check the flow and fill up the tank. When the tank is full, it will automatically switch off the pump. 
In case there is no supply, it will switch off the motor after one minute. The control system will re check after a predetermined time of 15 to 30 minuts and follow the same process. 
This can be done 8 times a day (usually four time in morning supply hours and four times in the evening supply hours). You can be sure that if there is supply you will have water.
In case water supply comes at any other timings and there is a minimum flow, still the flow switch will take on and fill up your tank. 
A very reliable and permanent system,whose advantages are self evident.

A Unique Systems TO SWITCH OFF THE PUMP WHEN YOUR WATER TANK IS FULL.
AUTO-TRIP is the watchman of your Water Tank. Once you switch the pump ON, you do not have to wait till the tank fills up and starts to overflow. The pump WILL be switched off at full level. Based on a Stainless Steel Float Switch and a Controller, AUTO TRIP savesa) Waterb) Electrcityc) Your House form Water Damaged) A lot of botheration and Stress