Level Indicators & Transmitters

Product Details:

Digital Liquid Level Indicator comprises of a Stainless Steel Probe unit and a Digital display Indicator.

The probe unit monitors level based on Magnetic Level sensor where the depth of water in tank is measured in stages of 20% (5 Stages) or 10% (10 Stages) or Continuous (Every Centimeter). 

The probe is connected to the Digital Indicator by means of a 2 core 1 sq mm PVC insulated shielded copper wire.

The Digital Display unit is normally available to work on standard 230 V AC.

The Indicator has the options for Control (Relay output), transmission 4-20 mA output, or RS 485 MODBUS output.

The Indicator can be configued to display stages, percentage or Liters/ Kiloliters as required.

The instrument is available for Industrial Water Management, Diesel, Fuel OIls, Chemicals and most Industrial Liquids.

The price will depend upon the features and configuration required/ selected.

Please contact us with your detailed requirement.

Product Details:

Magnetic Level Gauge is a Mechanical Level monitoring instrument, which displays the level the level visually. It consists of a CS or SS Side mounted cage with process connections with the tank. A Float moves within this tube with the level of the liquid in tank. The display is by means of Red and White Magnetic Flappers mounted in a SS or Aluminium frame on the tube.

As the float moves up or down within this tube, the flappers change their position so that the liquid level is displayed by the red portion and the empty space displays white.

It is a customized instrument where the user will have to provide the High and Low level of connection at the tank.

Additional Features (Optional)

1. It is possible to provide limit switches in the instrument, with suitable Relay output, for any control or alarm functions if required.
2. It is also possible to provide continuous analog output, or any other type of display which can be viewed remotely.

Please contact us for your specific requirements.

Product Details:

3 Stage Analog Level sensor is designed to monitor water supply Tankers in water scarecity areas, where the PHD or the Water Supply departments have to provide water in summer season, through Tankers.

The sensor, in combination with a GPS device, helps the department to remotely monitor the amount of water supplied and the number of trips carried out. This ensures that water is actually supplied and that the tankers are not overpaid, by showing more trips than actually supplied.

The sensor is top mounted in the tank and supplied 12 or 24 V DC power from a battery (not included with the sensor) and gives an output of 0-5 Volts in 3 steps of
0 V - Empty
0.5 Volts - 10 percent (Actually between 10 and 50 %)
2.5 V         50 percent (Between 50% and 100%)
5.0 Volts   100 percent (FULL TANK)

It is a sturdy sensor made in stainless steel tube fabricated to the depth of tank. It is top mounted on the tank by drilling a hole of 40 mm and fastened by 5 bolts of 5 mm.

The probe top has a 3 wire connection

Red: Connecte to Battery + ve
Black Connect to Battery - ve
Green : Output wire 0-5 V DC